Categories
Contact Us
Shandong Xiangtong Rubber Group Co.,Ltd
Add:No.1 Kaixuan Road,Jining City,Shandong Province,P.R.China
Tel:+86-537-2078989
Fax:+86-537-2930111
E-mail:sales@sdxttrading.com
News
Home > News > Content
Conveyor Belt Joint Method
Aug 14, 2018

All conveyor belts must be connected in a ring shape to be used, so the quality of the conveyor belt joints directly affects the service life of the conveyor belt and whether the conveyor line can run smoothly and smoothly. Common methods of conveyor belt joints include mechanical joints, cold bonded joints, and hot vulcanized joints.

Conveyor belt mechanical joint method: generally refers to the use of belt buckle joints, this joint method is convenient and convenient, but also economical, but the joint efficiency is low, easy to damage, has a certain impact on the service life of conveyor belt products. In the PVC and PVG whole core flame-retardant antistatic conveyor belt joints, the products of the 8-stage belt or lower are generally used.

Conveyor belt cold bonding head method: the joint is made by using a cold adhesive. This joint method is more efficient and mechanical than the mechanical joint, and should be able to have a better joint effect, but from the practical point of view, because the process conditions are difficult to master, the quality of the adhesive has a great influence on the joint. So it is not very stable.

Conveyor belt hot vulcanization joint method: It has proved to be the most ideal joint method, which can ensure high joint efficiency, and is also very stable. The joint life is also very long and easy to master. However, there are disadvantages such as troublesome process, high cost, and long joint time.